FlexiPro – Pro Cable Puller
FlexiPro – Pro Cable Puller
✅SAVE TIME
✅ PULL YOUR CABLES IN MINUTES
✅ SAVE MONEY
Couldn't load pickup availability
FlexiPro – Pro Cable Puller
-
I used to spend 30 minutes on a single conduit run with bends. Push the tape, it jams. Force it, it bends. With FlexiPro it goes through every 90 on the first shot. What used to take 30 minutes now takes 2.
-
Plumber here, always on my knees under sinks. These actually stay in place without cutting off my circulation. Comfy enough that I forget I'm wearing them.
-
Used to call my buddy every time I had a conduit run. Not anymore. FlexiPro does it in 2 minutes. Alone. Game changer.
30-Day Money Back Guarantee
30-Day Money Back Guarantee
Not satisfied after your first job? We'll refund you in full. No questions. No hassle.
You have 30 days to try FlexiPro on your jobsite. If it doesn't save you time, if it doesn't work on your conduit, if you're not 100% convinced — we refund everything.
Zero risk. Zero stress.
Technical Specifications
Technical Specifications
Cable compatibility: 5 to 8 mm
Material: reinforced technical plastic
Drive: works with any cordless drill + wool key bit
Mode: FORWARD and REVERSE (two entry points depending on pulling direction)
System: dual drive roller, pushes the cable through the conduit
Use: hand-held, positioned at the conduit entry, unpowered
Why Every Electrician Needs FlexiPro on Their Truck
Pull Your Cable in Minutes
Plug in your drill, insert the cable, and FlexiPro feeds it through the conduit — even through the tightest bends.
Zero Effort
Your drill does all the work for you. No more forcing, no more ending the day with a wrecked back.
Solo Operation, No Second Pair of Hands
No need for two people to pull a cable. You handle the entire job from start to finish. Alone.
More Jobs, More Profit
Every minute saved on a cable run goes straight into your next job. The tool pays for itself in a few visits.
Forward and Reverse
Cable stuck? Switch to reverse and reposition it — no need to pull everything out by hand.
The FlexiPro community speaks
Front Plate — Reinforced T-shaped plate with the FlexiPro logo and assembly hardware.
Housing — Technical plastic casing that protects the entire mechanism.
Drive Rollers — Two rollers that grip the cable and push it through the conduit — the heart of the system.
Front / Rear Connectors — Two entry points to choose the cable direction (forward and reverse).
Central Rod — The axis that guides the cable through the tool.
Drill Socket — The hex input where your cordless drill connects.
What happens when a craftsman designs something, not an office engineer
|
|
|
|---|---|---|
| Passes through 90° bends without jamming | ||
| Works alone, no second person needed | ||
| Does not snap mid-run | ||
| Forward and reverse mode | ||
| Works on every job site | ||
| End the day without wrecking your back |
FAQ
What exactly is this tool for?
What exactly is this tool for?
The FlexiPro is designed to push a fish tape through electrical conduit — the corrugated tubing that houses your wiring — without having to force it by hand.
Here's how it works: plug your cordless drill into the tool, feed your fish tape in, and the drive rollers push it through the conduit automatically — even on long runs and through bends where, by hand, the tape jams and forces.
The problem it solves: running a fish tape through conduit, especially on renovation jobs or long sections, is slow, exhausting, and usually requires two people — one pushing, one pulling. With FlexiPro, you do it alone, in minutes, without forcing.
In short, it's the tool that turns a 30-minute two-man job into a 2-minute solo operation.
What cable sizes does it work with?
What cable sizes does it work with?
FlexiPro is designed for fish tapes or cables from 5 to 8 mm in diameter, covering the vast majority of standard electrical cables used on job sites.
On the conduit side, it fits standard corrugated conduit that accommodates these cable sizes.
Is it complicated to use?
Is it complicated to use?
No, it's very simple — no special skills or training required. Just 3 steps:
- Plug your cordless drill into the tool's hex socket.
- Insert the fish tape into the FlexiPro at the conduit entry point.
- Pull the trigger — the drive rollers push the fish tape through the conduit automatically.
That's it. If the tape jams, switch to reverse to reposition it and you're good to go. No complicated setup, no manual to read — you're up and running from the very first run.